Release Date: Aug 12,2022
Crosstalk usually has two effects on the circuit, one is performance, the other is function. Because crosstalk will cause the circuit to violate the constraints of setup time and hold time, it will affect the timing of the circuit, resulting in phenomena such as bit errors, resulting in performance degradation. In addition, large spikes generated by crosstalk may cause circuit malfunctions. When the noise changes in the same direction as the signal, the signal may change faster, resulting in a violation of the hold time constraint; when the noise and the signal change in the opposite direction, the signal may slow down, resulting in a violation of the settling time constraints. And if there is a pulse with a sufficiently wide duration and a sufficiently large amplitude due to the influence of noise, it may lead to the malfunction of the circuit. Therefore, if the crosstalk exceeds a certain value, the circuit may malfunction and the system will not work properly.
25G SFP28 DAC is a 25GBASE-CR direct attach copper cable for data center environment. It provides a high speed, cost-effective alternatives to fiber optics in 25GbE Ethernet applications.
fiber pigtail is typically a fiber optic cable with one end factory pre-terminated fiber connector and the other exposed fiber.
This Article just briefly overviews 10G and 25G Ethernet (25Gb) technologies, focusing on the SFP+ transceiver and SFP28 transceiver.